Skip to content
TryHired.
How to become · Millwright

How to become a millwright: the typical path for Millwrights.

The entry education, experience and training BLS lists as typical, how much preparation O*NET says the work takes, what the job involves, and the related occupations around it.

Updated Nov 9, 2026 · Data: BLS Employment Projections 2025–35 · O*NET 31.0 · BLS OEWS May 2025
Typical entry path · BLS Employment Projections 2025–35
Education
High school diploma or equivalent
Related work experience
None
On-the-job training
Apprenticeship
Preparation
Job Zone 1-2 of 5
O*NET

Typical, not required: BLS describes the usual entry path, not the law.

Quick answer

BLS lists a high school diploma or equivalent as the typical entry-level education for Millwrights (SOC 49-9044), the occupation BLS counts millwrights in, with no work experience in a related occupation and an apprenticeship (typically 3 to 5 years) to become competent (Employment Projections, 2025–35). These are typical, not legal requirements. O*NET places the job in Job Zone 1-2 of 5.

Who this covers

What BLS counts as a millwright

Data Title evidence from O*NET 31.0; figures belong to the official occupation named.

O*NET 31.0 lists “Millwright” under Millwrights (O*NET-SOC 49-9044.00) as its occupation title and in its Sample of Reported Titles (titles job holders report) and as an alternate job title. BLS counts these workers in the occupation Millwrights (SOC 49-9044). Every figure on this page is for that occupation.

Other titles O*NET lists for the occupation: Maintenance Mechanic, Maintenance Millwright, Millwright Business Representative (Millwright Business Rep), Millwright Foreman, Millwright General Foreman, Millwright Instructor, Precision Millwright.

The path

Steps to becoming a millwright

Data Steps 1 to 3 are BLS Employment Projections categories; skills and tools are O*NET; the last step is advice.

  1. EducationPlan for a high school diploma or equivalent

    The typical entry-level education BLS lists for Millwrights. Typical, not a legal requirement.

  2. ExperienceRelated work experience

    BLS: no work experience in a related occupation is typical for entry into Millwrights.

  3. TrainingExpect an apprenticeship (typically 3 to 5 years)

    BLS’s typical on-the-job training for Millwrights, once hired.

  4. SkillsBuild the core skills

    Installation, Equipment Maintenance, Troubleshooting are rated most important for the occupation (O*NET).

  5. ToolsLearn the tools

    Autodesk AutoCAD, Dassault Systemes SolidWorks, Microsoft Excel (examples O*NET lists for the occupation).

  6. KnowledgeStudy the knowledge areas

    Mechanical, Mathematics, Building and Construction are the knowledge areas O*NET rates most important for the occupation.

  7. CredentialsCheck licensing with the issuing agency

    Requirements vary by state and change over time; see the box below.

O*NET Job Zone 1-2 of 5: Some occupations may need little or no previous experience; others require several months to a year of experience. For example, landscaping and groundskeeping workers might require very little training or previous experience, while agricultural equipment operators can benefit from on-the job training.

Education O*NET respondents report as required
High school diploma45%
Post-secondary certificate36%
Some college9%
Less than high school5%
Associate's degree5%
Related work experience · O*NET respondents
None23%
Up to and including 1 month5%
Over 1 month, up to and including 3 months9%
Over 3 months, up to and including 6 months5%
Over 6 months, up to and including 1 year5%
Over 1 year, up to and including 2 years18%
Over 2 years, up to and including 4 years9%
Over 4 years, up to and including 6 years27%
On-the-job training · O*NET respondents
None or short demonstration5%
Anything beyond short demonstration, up to and including 1 month10%
Over 1 month, up to and including 3 months10%
Over 6 months, up to and including 1 year10%
Over 1 year, up to and including 2 years5%
Over 2 years, up to and including 4 years38%
Over 4 years, up to and including 10 years24%
Required vs typical

What the law requires and what employers prefer

Data Credential contract wording.

What is typical is not what is required. The education, experience and training above are the BLS’s typical entry path for the occupation, not legal requirements. Some occupations also need a government license or registration, set by a state or federal agency; a certification is a credential from a private or professional body, not a license, and employers may prefer one without the law requiring it. This page names no licensing requirement because none is drawn from an official licensing source here, and a missing entry on this page does not mean none is required. Licensing rules can change. Verify current requirements with the issuing agency.

The work

What millwrights do

Data Core tasks O*NET lists for Millwrights.

  1. Replace defective parts of machine, or adjust clearances and alignment of moving parts.
  2. Align machines or equipment, using hoists, jacks, hand tools, squares, rules, micrometers, lasers, or plumb bobs.
  3. Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
  4. Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline.
  5. Conduct preventative maintenance and repair, and lubricate machines and equipment.
  6. Assemble and install equipment, using hand tools and power tools.
  7. Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
  8. Move machinery and equipment, using hoists, dollies, rollers, and trucks.
  9. Level bedplate and establish centerline, using straightedge, levels, and transit.
  10. Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
  11. Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
  12. Lay out mounting holes, using measuring instruments, and drill holes with power drill.

Skills O*NET rates most important for Millwrights: Installation, Equipment Maintenance, Troubleshooting, Operations Monitoring, Repairing, Critical Thinking.

Knowledge areas O*NET rates most important: Mechanical, Mathematics, Building and Construction, Education and Training, Engineering and Technology, Public Safety and Security.

Tools and technology examples O*NET lists: Autodesk AutoCAD, Dassault Systemes SolidWorks, Microsoft Excel, Microsoft Office software, Microsoft Outlook, Microsoft Word.

Work activities O*NET rates most important: Repairing and Maintaining Mechanical Equipment, Inspecting Equipment, Structures, or Materials, Handling and Moving Objects, Getting Information, Performing General Physical Activities.

Career path

Related occupations, by preparation

Data Occupations O*NET lists as related, with BLS May 2025 medians and O*NET Job Zones. O*NET defines no promotion ladders; these are related jobs, not a fixed sequence.

Same or more preparation
Aircraft Structure, Surfaces, Rigging, and Systems Assemblers$65,380 median · Job Zone 1-2 of 5
Maintenance and Repair Workers, General$49,590 median · Job Zone 3 of 5Industrial Machinery Mechanics$64,520 median · Job Zone 3 of 5
Engine and Other Machine Assemblers$53,710 median · Job Zone 1-2 of 5
Boilermakers$76,410 median · Job Zone 1-2 of 5Machinists$58,750 median · Job Zone 3 of 5

Data Pay once in the job: the BLS median for Millwrights was $65,700 a year in May 2025; the lowest-paid quarter earned $56,390 or less. See the full Millwright salary data.

Outlook

Jobs and openings to 2035

Data BLS Employment Projections 2025–35.

BLS projects employment in Millwrights to grow 0.9% from 2025 to 2035, from 40,700 to 41,000 jobs, with about 3,200 openings a year on average, including replacement openings (Employment Projections, 2025–35).

Projected openings are BLS's annual average for 2025–35: openings from growth plus openings to replace workers who leave the labor force or move to other occupations. They are not current job vacancies or listings.

Method

How this page is built

Typical entry-level education, related work experience and on-the-job training are BLS Employment Projections 2025–35 categories for the occupation. Job Zone, education shares, tasks, skills, tools and related occupations come from O*NET 31.0; pay is BLS OEWS May 2025. BLS occupation: Millwrights.

This page includes information from the O*NET® 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. TryHired has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications.

What this page can't tell you
  • Licensing rules in your state.
  • Requirements at a specific employer.
  • How long the path will take you personally.
Sources
  1. U.S. Bureau of Labor Statistics, Employment Projections program, Occupational projections, 2025–35 (released Aug 27, 2026; occupation.xlsx, Tables 1.2 and 1.10; retrieved Oct 25, 2026). Definitions.
  2. O*NET 31.0 Database, U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. TryHired selected, ranked and combined the data; O*NET is not responsible for these pages.
  3. U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 estimates (public domain).
Keep exploring

More for millwrights