Quality Inspector: the person who decides if a part is good
What quality inspectors check and how, how the job differs from quality engineering or machining, what current employer postings ask for, and the usual route in. Quality control inspector is the same job under another title.
A quality inspector, also called a quality control inspector, checks manufactured parts and assemblies against their engineering drawings, specifications and purchase-order requirements. Inspectors measure features with calipers, micrometers, gauges and coordinate measuring machines (CMMs), look for visual defects, review supplier certifications, and write up anything that does not conform so it can be reviewed and fixed. Inspections happen when material arrives (incoming or receiving inspection), during production (in-process) and before release (final). The postings we read, mostly from aerospace and defense manufacturers, ask for a high school diploma or equivalent and two or more years of inspection or quality experience, plus the ability to read drawings and GD&T.
What a Quality Inspector does
The core of the work is careful comparison. The inspector takes a part, finds the drawing and revision it was built to, identifies which features and tolerances matter, measures them with the right tool, and records the result. When something is out of tolerance, damaged or missing paperwork, the inspector stops it, documents a nonconformance and hands it to the material review process, where engineers decide whether to rework, scrap or accept it. A good inspector is precise, consistent and willing to stop work when the evidence says so.
Inspectors also keep the system honest: they maintain or help calibrate measuring tools, support audits against quality standards such as AS9100 or ISO 9001, and suggest where inspection points or work instructions should change. Some roles specialize, for example supplier inspectors who travel to vendors, electrical inspectors who check cable harnesses and circuit boards, or dimensional inspectors who program CMMs and portable measuring arms.
- Running incoming inspection on a delivery of purchased parts and checking the supplier's certifications.
- Measuring machined features against the drawing with calipers, micrometers, gauges or a CMM.
- Inspecting work in progress on the production floor and signing off completed steps.
- Writing a nonconformance report for a part that is out of tolerance and supporting its review.
- Checking that your measuring tools are within their calibration dates.
- Supporting an internal or customer audit of inspection records.
O*NET lists Quality Inspector as a job title under several occupations, including Inspectors, Testers, Sorters, Samplers, and Weighers (51-9061.00). That occupation covers wider work, so the O*NET section below describes the whole occupation; the rest of this page is specific to the title.
What employers ask Quality Inspectors to do and bring
- Employers ask quality inspectors to inspect at several stages: incoming material, in-process work and final assemblies.
- Precision measuring tools are central, from calipers and micrometers to coordinate measuring machines.
- Reading engineering drawings and geometric dimensioning and tolerancing (GD&T) comes up in nearly every posting we read.
- Documenting nonconformances is part of the job, so problems can be reviewed and traced to root cause.
- Postings ask for about two or more years of inspection or quality experience and a high school diploma or equivalent.
- Reviewing supplier and material certifications is part of incoming inspection.
- Anduril's quality inspector posting lists experience in a facility run under a quality management standard such as AS9100 or ISO 9001.
- Anduril lists IPC-A-610 or IPC-A-620 certification, the electronics and cable-harness workmanship standards, as a preferred qualification.
- Anduril's supplier quality control inspector role involves travel to suppliers' facilities for up to 75% of the time.
These points come from current job postings on the employers' own public job boards, read on the dates shown. Each general point is backed by at least two independent sources; points that rest on a single employer name that employer. They describe what employers commonly ask for, not legal requirements, and any one employer may differ.
| Employer | Posting | Read |
|---|---|---|
| Anduril Industries | Supplier Quality Control Inspector | Nov 15, 2026 |
| Anduril Industries | Quality Inspector | Nov 15, 2026 |
| hermeus | Quality Inspector | Nov 15, 2026 |
| Relativity Space | Quality Inspector II, Dimensional Inspection, Second Shift | Nov 15, 2026 |
| Rocket Lab Corporation | Incoming Quality Control Inspector - Mechanical | Nov 15, 2026 |
| SpaceX | Quality Inspector (Falcon & Dragon) | Nov 15, 2026 |
| Ursa Major | Quality Control Inspector II (Weekend Shift) | Nov 15, 2026 |
Quality inspector vs quality engineer, quality control analyst and machinist
- A quality engineer designs inspection plans, analyzes defects and owns corrective actions; the inspector carries out the inspections and documents what they find.
- A quality control analyst usually tests samples in a laboratory, for example in food, chemical or pharmaceutical production; a quality inspector checks manufactured parts and assemblies.
- A machinist makes the parts; an inspector verifies them. Machining experience helps inspectors understand why a feature is out of tolerance.
- Quality control inspector and quality inspector are used for the same job. Some employers add a focus, such as dimensional, electrical, receiving or supplier inspection.
How to become a Quality Inspector
- Get manufacturing experience. Postings ask for two or more years in inspection, quality or a manufacturing environment; machining, assembly or production roles are common starting points.
- Learn to read drawings and GD&T. Community colleges and technical schools teach blueprint reading and ASME Y14.5 tolerancing.
- Get hands-on with measuring tools. Calipers, micrometers, height gauges and pin or thread gauges first; CMM or portable-arm programming moves you up.
- Learn the paperwork. Nonconformance reports, material review and traceability records are what auditors look at.
- Add a specialty if it fits. Electronics inspectors often get IPC workmanship training; aerospace inspectors work under AS9100 systems.
Skills and tools quality inspectors use
- Hand metrology: calipers, micrometers, height, depth, pin and thread gauges.
- CMMs and portable arms: coordinate measuring machines and articulating arms such as Romer or FARO, sometimes with programming.
- Drawings and GD&T: reading engineering drawings, models and tolerances (ASME Y14.5).
- Quality systems: nonconformance reports, material review boards and calibration records under standards like AS9100 or ISO 9001.
- Manufacturing software: ERP and MES systems for inspection records and traceability.
- Visual inspection: finding burrs, damage, contamination and workmanship defects.
What O*NET says about Inspectors, Testers, Sorters, Samplers, and Weighers
The data below describes the whole O*NET occupation Inspectors, Testers, Sorters, Samplers, and Weighers (51-9061.00), not quality inspectors specifically. Use it to see what the wider occupation is rated on; the sections above describe what is different about this title.
| # | Task (O*NET wording) |
|---|---|
| 1 | Discard or reject products, materials, or equipment not meeting specifications. |
| 2 | Mark items with details, such as grade or acceptance-rejection status. |
| 3 | Measure dimensions of products to verify conformance to specifications, using measuring instruments, such as rulers, calipers, gauges, or micrometers. |
| 4 | Notify supervisors or other personnel of production problems. |
| 5 | Inspect, test, or measure materials, products, installations, or work for conformance to specifications. |
| Skill | Importance (1–5) |
|---|---|
| Writing | 3.25 |
| Critical Thinking | 3.25 |
| Reading Comprehension | 3.12 |
| Active Listening | 3.12 |
| Speaking | 3.12 |
| Monitoring | 3.00 |
In-demand technology named by O*NET for this occupation: Microsoft Excel, Microsoft Office software, Microsoft Outlook, Microsoft PowerPoint, Microsoft Word.
Education reported by workers in this occupation (O*NET survey): High School Diploma or the equivalent (such as a GED) 69.8%; Post-Secondary Certificate 26.9%. These shares describe the whole occupation; they are not a requirement for this title.
O*NET 31.0 Database, U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. TryHired selected, ranked and combined the data; O*NET is not responsible for these pages.
Credentials: what exists and what employers rely on
- Quality inspection is not a licensed occupation. Employers in our sample rely on inspection experience, drawing and GD&T skills, and a high school diploma or equivalent, with technical training preferred.
- Some postings prefer industry workmanship certifications, such as IPC-A-610 or IPC-A-620 for electronics and cable assemblies.
- Engineering-level quality certifications, such as ASQ's Certified Quality Engineer, are a step toward quality engineering rather than a requirement for inspection jobs.
- Defense and aerospace employers sometimes add citizenship or security clearance conditions for export-controlled work; these come from the employer, not the job title.
Certifications are optional unless an employer or regulator says otherwise; read the posting, and check eligibility on the issuer's own site before you apply.
Where this role leads
- Inspector: the broader O*NET inspectors occupation and its other titles.
- Quality Control Analyst: for laboratory testing roles in quality.
- Machinist: for making the parts that inspectors verify.
- Industrial Engineer: for improving manufacturing processes and quality systems.
What Quality Inspectors earn
TryHired does not print a salary for quality inspectors. The U.S. Bureau of Labor Statistics publishes pay for occupations, not job titles, so the closest official figures are for the wider occupation. For the official numbers, see inspector salary: those figures cover all Inspectors, Testers, Sorters, Samplers, and Weighers (BLS 51-9061), not quality inspectors specifically.
Pay for this title depends on employer, industry, region and level, so ask how the role is graded and compare offers against the posting's own range where one is published.
Applying for Quality Inspector jobs
- List the measuring tools and CMM or arm software you have used, and how often.
- Show you can read drawings: mention GD&T training or the standards you have worked to, such as ASME Y14.5.
- Name the quality system you worked under, such as AS9100 or ISO 9001, and the paperwork you completed.
- In interviews, expect a practical question about an out-of-tolerance part: explain how you would confirm the measurement, document it and escalate it without passing the part.
Two free tools start from this job title, so you only add your own experience: draft a resume summary for a Quality Inspector role or write a LinkedIn headline for a Quality Inspector role. Neither fills in skills or results for you: list only the work you have actually done.
Structure, sections and examples you can adapt to this title.
Open →InterviewInspector interviewQuestions to rehearse before the interview.
Open →Disclosure: TryHired makes HIRED, a paid job-search program, so we have a conflict of interest when we mention it. Everything on this page is free to use without buying anything.
Other job titles in this group
Questions people ask
What does a quality inspector do?
Is a quality control inspector the same as a quality inspector?
What qualifications do quality inspectors need?
How this page is built
The employer section summarises current postings from the employers' own public job boards, saved on the read date shown; every general point is backed by at least two independent sources and single-employer points name the employer; each maps to short verbatim quotes in this page's claims ledger. Employers' preferences are not legal requirements. The job, difference, path, tools and hiring sections are TryHired's explanation and advice, labelled as such. The O*NET section shows O*NET 31.0 data for the broader occupation and says so. TryHired does not print pay for job titles that BLS does not publish separately.
- Pay for this title: BLS publishes occupations, not titles.
- Whether a particular employer requires a degree, a certification or a license for this title.
- How a specific company levels or names this role.
- Our sample is drawn from aerospace and defense manufacturers with public job boards; inspection roles in food, automotive or construction may use different standards and tools.
- Anduril Industries, “Quality Inspector” job posting, read Nov 15, 2026.
- Anduril Industries, “Supplier Quality Control Inspector” job posting, read Nov 15, 2026.
- Relativity Space, “Quality Inspector II, Dimensional Inspection, Second Shift” job posting, read Nov 15, 2026.
- SpaceX, “Quality Inspector (Falcon & Dragon)” job posting, read Nov 15, 2026.
- Rocket Lab Corporation, “Incoming Quality Control Inspector - Mechanical” job posting, read Nov 15, 2026.
- Ursa Major, “Quality Control Inspector II (Weekend Shift)” job posting, read Nov 15, 2026.
- hermeus, “Quality Inspector” job posting, read Nov 15, 2026.
- O*NET 31.0 Database, U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. TryHired selected, ranked and combined the data; O*NET is not responsible for these pages.
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (via the linked TryHired salary page)