Skip to content
TryHired.
How to become · Metal Fabricator

How to become a metal fabricator: the typical path for Structural Metal Fabricators and Fitters.

The entry education, experience and training BLS lists as typical, how much preparation O*NET says the work takes, what the job involves, and the related occupations around it.

Updated Nov 9, 2026 · Data: BLS Employment Projections 2025–35 · O*NET 31.0 · BLS OEWS May 2025
Typical entry path · BLS Employment Projections 2025–35
Education
High school diploma or equivalent
Related work experience
None
On-the-job training
Moderate-term on-the-job training
Preparation
Job Zone 1-2 of 5
O*NET

Typical, not required: BLS describes the usual entry path, not the law.

Quick answer

BLS lists a high school diploma or equivalent as the typical entry-level education for Structural Metal Fabricators and Fitters (SOC 51-2041), the occupation BLS counts metal fabricators in, with no work experience in a related occupation and moderate-term on-the-job training (more than a month, up to 12 months) to become competent (Employment Projections, 2025–35). These are typical, not legal requirements. O*NET places the job in Job Zone 1-2 of 5.

Who this covers

What BLS counts as a metal fabricator

Data Title evidence from O*NET 31.0; figures belong to the official occupation named.

O*NET 31.0 lists “Metal Fabricator” under Structural Metal Fabricators and Fitters (O*NET-SOC 51-2041.00) in its Sample of Reported Titles (titles job holders report) and as an alternate job title. 1 other O*NET occupation lists it only as an alternate title, not as a reported or occupation title. BLS counts these workers in the occupation Structural Metal Fabricators and Fitters (SOC 51-2041). Every figure on this page is for that occupation.

Other titles O*NET lists for the occupation: Fabricator, Fitter, Layout Man, Mill Beam Fitter, Ship Fitter, Small Parts Fabricator, Steel Fabricator, Structural Planner.

The path

Steps to becoming a metal fabricator

Data Steps 1 to 3 are BLS Employment Projections categories; skills and tools are O*NET; the last step is advice.

  1. EducationPlan for a high school diploma or equivalent

    The typical entry-level education BLS lists for Structural Metal Fabricators and Fitters. Typical, not a legal requirement.

  2. ExperienceRelated work experience

    BLS: no work experience in a related occupation is typical for entry into Structural Metal Fabricators and Fitters.

  3. TrainingExpect moderate-term on-the-job training (more than a month, up to 12 months)

    BLS’s typical on-the-job training for Structural Metal Fabricators and Fitters, once hired.

  4. SkillsBuild the core skills

    Reading Comprehension, Active Listening, Speaking are rated most important for the occupation (O*NET).

  5. ToolsLearn the tools

    Microsoft Outlook, Microsoft Excel, Microsoft Office software (examples O*NET lists for the occupation).

  6. KnowledgeStudy the knowledge areas

    Mathematics, Production and Processing, Mechanical are the knowledge areas O*NET rates most important for the occupation.

  7. CredentialsCheck licensing with the issuing agency

    Requirements vary by state and change over time; see the box below.

O*NET Job Zone 1-2 of 5: Some occupations may need little or no previous experience; others require several months to a year of experience. For example, landscaping and groundskeeping workers might require very little training or previous experience, while agricultural equipment operators can benefit from on-the job training.

Education O*NET respondents report as required
High school diploma77%
Less than high school18%
Post-secondary certificate3%
Associate's degree2%
Related work experience · O*NET respondents
None43%
Up to and including 1 month4%
Over 3 months, up to and including 6 months7%
Over 6 months, up to and including 1 year12%
Over 1 year, up to and including 2 years14%
Over 2 years, up to and including 4 years20%
On-the-job training · O*NET respondents
None or short demonstration18%
Anything beyond short demonstration, up to and including 1 month28%
Over 1 month, up to and including 3 months34%
Over 3 months, up to and including 6 months8%
Over 6 months, up to and including 1 year12%
Required vs typical

What the law requires and what employers prefer

Data Credential contract wording.

What is typical is not what is required. The education, experience and training above are the BLS’s typical entry path for the occupation, not legal requirements. Some occupations also need a government license or registration, set by a state or federal agency; a certification is a credential from a private or professional body, not a license, and employers may prefer one without the law requiring it. This page names no licensing requirement because none is drawn from an official licensing source here, and a missing entry on this page does not mean none is required. Licensing rules can change. Verify current requirements with the issuing agency.

The work

What metal fabricators do

Data Core tasks O*NET lists for Structural Metal Fabricators and Fitters.

  1. Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes.
  2. Study engineering drawings and blueprints to determine materials requirements and task sequences.
  3. Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.
  4. Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met.
  5. Tack-weld fitted parts together.
  6. Move parts into position, manually or with hoists or cranes.
  7. Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components.
  8. Position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding or riveting.
  9. Lift or move materials and finished products, using large cranes.
  10. Set up face blocks, jigs, and fixtures.
  11. Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
  12. Hammer, chip, and grind workpieces to cut, bend, and straighten metal.

Skills O*NET rates most important for Structural Metal Fabricators and Fitters: Reading Comprehension, Active Listening, Speaking, Critical Thinking, Operations Monitoring, Monitoring.

Knowledge areas O*NET rates most important: Mathematics, Production and Processing, Mechanical, English Language.

Tools and technology examples O*NET lists: Microsoft Outlook, Microsoft Excel, Microsoft Office software, Microsoft Word.

Work activities O*NET rates most important: Communicating with Supervisors, Peers, or Subordinates, Controlling Machines and Processes, Inspecting Equipment, Structures, or Materials, Handling and Moving Objects, Performing General Physical Activities.

Career path

Related occupations, by preparation

Data Occupations O*NET lists as related, with BLS May 2025 medians and O*NET Job Zones. O*NET defines no promotion ladders; these are related jobs, not a fixed sequence.

Same or more preparation
Aircraft Structure, Surfaces, Rigging, and Systems Assemblers$65,380 median · Job Zone 1-2 of 5
Layout Workers, Metal and Plastic$63,870 median · Job Zone 1-2 of 5
Sheet Metal Workers$61,800 median · Job Zone 1-2 of 5Structural Iron and Steel Workers$62,780 median · Job Zone 1-2 of 5
Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders$47,920 median · Job Zone 1-2 of 5
Tool and Die Makers$64,050 median · Job Zone 3 of 5

Data Pay once in the job: the BLS median for Structural Metal Fabricators and Fitters was $51,330 a year in May 2025; the lowest-paid quarter earned $45,610 or less. See the full Metal Fabricator salary data.

Outlook

Jobs and openings to 2035

Data BLS Employment Projections 2025–35.

BLS projects employment in Structural Metal Fabricators and Fitters to decline 6.2% from 2025 to 2035, from 52,300 to 49,000 jobs, with about 4,800 openings a year on average, including replacement openings (Employment Projections, 2025–35).

Projected openings are BLS's annual average for 2025–35: openings from growth plus openings to replace workers who leave the labor force or move to other occupations. They are not current job vacancies or listings.

Method

How this page is built

Typical entry-level education, related work experience and on-the-job training are BLS Employment Projections 2025–35 categories for the occupation. Job Zone, education shares, tasks, skills, tools and related occupations come from O*NET 31.0; pay is BLS OEWS May 2025. BLS occupation: Structural metal fabricators and fitters.

This page includes information from the O*NET® 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. TryHired has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications.

What this page can't tell you
  • Licensing rules in your state.
  • Requirements at a specific employer.
  • How long the path will take you personally.
Sources
  1. U.S. Bureau of Labor Statistics, Employment Projections program, Occupational projections, 2025–35 (released Aug 27, 2026; occupation.xlsx, Tables 1.2 and 1.10; retrieved Oct 25, 2026). Definitions.
  2. O*NET 31.0 Database, U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. TryHired selected, ranked and combined the data; O*NET is not responsible for these pages.
  3. U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 estimates (public domain).
Keep exploring

More for metal fabricators