How to become a commercial diver: the typical path for Commercial Divers.
The entry education, experience and training BLS lists as typical, how much preparation O*NET says the work takes, what the job involves, and the related occupations around it.
- Education
- Postsecondary nondegree award
- Related work experience
- None
- On-the-job training
- Moderate-term on-the-job training
- Preparation
- Job Zone 3 of 5
- O*NET
Typical, not required: BLS describes the usual entry path, not the law.
BLS lists a postsecondary nondegree award as the typical entry-level education for Commercial Divers (SOC 49-9092), the occupation BLS counts commercial divers in, with no work experience in a related occupation and moderate-term on-the-job training (more than a month, up to 12 months) to become competent (Employment Projections, 2025–35). These are typical, not legal requirements. O*NET places the job in Job Zone 3 of 5.
What BLS counts as a commercial diver
Data Title evidence from O*NET 31.0; figures belong to the official occupation named.
O*NET 31.0 lists “Commercial Diver” under Commercial Divers (O*NET-SOC 49-9092.00) as its occupation title. BLS counts these workers in the occupation Commercial Divers (SOC 49-9092). Every figure on this page is for that occupation.
Other titles O*NET lists for the occupation: Diver, Diver Tender, Diving Coordinator, Hard Hat Diver, NDT UW Welder (Non Destructive Testing Under Water Welder), Salvage Diver, Saturation Diver.
Also searched as “Underwater Welder” (O*NET 31.0 files the title under Commercial Divers (O*NET-SOC 49-9092.00)). Every figure on this page still describes the official occupation named above.
Steps to becoming a commercial diver
Data Steps 1 to 3 are BLS Employment Projections categories; skills and tools are O*NET; the last step is advice.
- EducationPlan for a postsecondary nondegree award
The typical entry-level education BLS lists for Commercial Divers. Typical, not a legal requirement.
- ExperienceRelated work experience
BLS: no work experience in a related occupation is typical for entry into Commercial Divers.
- TrainingExpect moderate-term on-the-job training (more than a month, up to 12 months)
BLS’s typical on-the-job training for Commercial Divers, once hired.
- SkillsBuild the core skills
Active Listening, Critical Thinking, Operations Monitoring are rated most important for the occupation (O*NET).
- ToolsLearn the tools
Dynamic positioning DP software, Diving logbook software, Diving table software (examples O*NET lists for the occupation).
- KnowledgeStudy the knowledge areas
Mechanical, Building and Construction, Public Safety and Security are the knowledge areas O*NET rates most important for the occupation.
- CredentialsCheck licensing with the issuing agency
Requirements vary by state and change over time; see the box below.
O*NET Job Zone 3 of 5: Previous work-related skill, knowledge, or experience is required for these occupations. For example, an electrician must have completed three or four years of apprenticeship or several years of vocational training, and often must have passed a licensing exam, in order to perform the job.
What the law requires and what employers prefer
Data Credential contract wording.
What is typical is not what is required. The education, experience and training above are the BLS’s typical entry path for the occupation, not legal requirements. Some occupations also need a government license or registration, set by a state or federal agency; a certification is a credential from a private or professional body, not a license, and employers may prefer one without the law requiring it. This page names no licensing requirement because none is drawn from an official licensing source here, and a missing entry on this page does not mean none is required. Licensing rules can change. Verify current requirements with the issuing agency.
What commercial divers do
Data Core tasks O*NET lists for Commercial Divers.
- Check and maintain diving equipment, such as helmets, masks, air tanks, harnesses, or gauges.
- Take appropriate safety precautions, such as monitoring dive lengths and depths and registering with authorities before diving expeditions begin.
- Communicate with workers on the surface while underwater, using signal lines or telephones.
- Descend into water with the aid of diver helpers, using scuba gear or diving suits.
- Inspect and test docks, ships, buoyage systems, plant intakes or outflows, or underwater pipelines, cables, or sewers, using closed circuit television, still photography, and testing equipment.
- Obtain information about diving tasks and environmental conditions.
- Inspect the condition of underwater steel or wood structures.
- Operate underwater video, sonar, recording, or related equipment to investigate underwater structures or marine life.
- Repair ships, bridge foundations, or other structures below the water line, using caulk, bolts, and hand tools.
- Cut and weld steel, using underwater welding equipment, jigs, and supports.
- Carry out non-destructive testing, such as tests for cracks on the legs of oil rigs at sea.
- Take test samples or photographs to assess the condition of vessels or structures.
Skills O*NET rates most important for Commercial Divers: Active Listening, Critical Thinking, Operations Monitoring, Speaking, Quality Control Analysis, Coordination.
Knowledge areas O*NET rates most important: Mechanical, Building and Construction, Public Safety and Security, Physics, Design, Customer and Personal Service.
Tools and technology examples O*NET lists: Dynamic positioning DP software, Diving logbook software, Diving table software, Remote operated vehicle ROV dive log software, Web browser software.
Work activities O*NET rates most important: Inspecting Equipment, Structures, or Materials, Getting Information, Performing General Physical Activities, Handling and Moving Objects, Updating and Using Relevant Knowledge.
Related occupations, by preparation
Data Occupations O*NET lists as related, with BLS May 2025 medians and O*NET Job Zones. O*NET defines no promotion ladders; these are related jobs, not a fixed sequence.
Data Pay once in the job: the BLS median for Commercial Divers was $72,990 a year in May 2025; the lowest-paid quarter earned $54,810 or less. See the full Commercial Diver salary data.
Jobs and openings to 2035
Data BLS Employment Projections 2025–35.
BLS projects employment in Commercial Divers to grow 4.8% from 2025 to 2035, from 4,000 to 4,200 jobs, with about 400 openings a year on average, including replacement openings (Employment Projections, 2025–35).
Projected openings are BLS's annual average for 2025–35: openings from growth plus openings to replace workers who leave the labor force or move to other occupations. They are not current job vacancies or listings.
How this page is built
Typical entry-level education, related work experience and on-the-job training are BLS Employment Projections 2025–35 categories for the occupation. Job Zone, education shares, tasks, skills, tools and related occupations come from O*NET 31.0; pay is BLS OEWS May 2025. BLS occupation: Commercial divers.
This page includes information from the O*NET® 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. TryHired has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications.
- Licensing rules in your state.
- Requirements at a specific employer.
- How long the path will take you personally.
- U.S. Bureau of Labor Statistics, Employment Projections program, Occupational projections, 2025–35 (released Aug 27, 2026; occupation.xlsx, Tables 1.2 and 1.10; retrieved Oct 25, 2026). Definitions.
- O*NET 31.0 Database, U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. TryHired selected, ranked and combined the data; O*NET is not responsible for these pages.
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 estimates (public domain).