Skip to content
TryHired.
How to become · Watchmaker

How to become a watchmaker: the typical path for Watch and Clock Repairers.

The entry education, experience and training BLS lists as typical, how much preparation O*NET says the work takes, what the job involves, and the related occupations around it.

Updated Nov 10, 2026 · Data: BLS Employment Projections 2025–35 · O*NET 31.0 · BLS OEWS May 2025
Typical entry path · BLS Employment Projections 2025–35
Education
High school diploma or equivalent
Related work experience
None
On-the-job training
Long-term on-the-job training
Preparation
Job Zone 3 of 5
O*NET

Typical, not required: BLS describes the usual entry path, not the law.

Quick answer

BLS lists a high school diploma or equivalent as the typical entry-level education for Watch and Clock Repairers (SOC 49-9064), the occupation BLS counts watchmakers in, with no work experience in a related occupation and long-term on-the-job training (more than 12 months) to become competent (Employment Projections, 2025–35). These are typical, not legal requirements. O*NET places the job in Job Zone 3 of 5.

Who this covers

What BLS counts as a watchmaker

Data Title evidence from O*NET 31.0; figures belong to the official occupation named.

O*NET 31.0 lists “Watchmaker” under Watch and Clock Repairers (O*NET-SOC 49-9064.00) as an alternate job title. The BLS SOC 2018 Direct Match Title File codes “Watchmaker” directly to Watch and Clock Repairers (SOC 49-9064). O*NET also lists the title under 1 other occupation; BLS's own title file decides. BLS counts these workers in the occupation Watch and Clock Repairers (SOC 49-9064). Every figure on this page is for that occupation.

Other titles O*NET lists for the occupation: Antique Clock Repairer, Clock Repair Technician, Clock Repairer, Watch and Clock Repairer, Watch Estimator, Watch Repair Person, Watch Repair Technician, Watch Repairer.

The path

Steps to becoming a watchmaker

Data Steps 1 to 3 are BLS Employment Projections categories; skills and tools are O*NET; the last step is advice.

  1. EducationPlan for a high school diploma or equivalent

    The typical entry-level education BLS lists for Watch and Clock Repairers. Typical, not a legal requirement.

  2. ExperienceRelated work experience

    BLS: no work experience in a related occupation is typical for entry into Watch and Clock Repairers.

  3. TrainingExpect long-term on-the-job training (more than 12 months)

    BLS’s typical on-the-job training for Watch and Clock Repairers, once hired.

  4. SkillsBuild the core skills

    Repairing, Operations Monitoring, Critical Thinking are rated most important for the occupation (O*NET).

  5. ToolsLearn the tools

    Intuit QuickBooks, Microsoft Excel, Microsoft Office software (examples O*NET lists for the occupation).

  6. KnowledgeStudy the knowledge areas

    Customer and Personal Service, Administration and Management, Mechanical are the knowledge areas O*NET rates most important for the occupation.

  7. CredentialsCheck licensing with the issuing agency

    Requirements vary by state and change over time; see the box below.

O*NET Job Zone 3 of 5: Previous work-related skill, knowledge, or experience is required for these occupations. For example, an electrician must have completed three or four years of apprenticeship or several years of vocational training, and often must have passed a licensing exam, in order to perform the job.

Education O*NET respondents report as required
High school diploma22%
Some college8%

Not shown: answers with low-precision O*NET estimates, so these shares do not add to 100%.

Related work experience · O*NET respondents
Over 6 months, up to and including 1 year9%
Over 1 year, up to and including 2 years6%
On-the-job training · O*NET respondents
Over 3 months, up to and including 6 months20%

Answers with low-precision O*NET estimates are not shown, so a card's shares can add to less than 100%.

Required vs typical

What the law requires and what employers prefer

Data Credential contract wording.

What is typical is not what is required. The education, experience and training above are the BLS’s typical entry path for the occupation, not legal requirements. Some occupations also need a government license or registration, set by a state or federal agency; a certification is a credential from a private or professional body, not a license, and employers may prefer one without the law requiring it. This page names no licensing requirement because none is drawn from an official licensing source here, and a missing entry on this page does not mean none is required. Licensing rules can change. Verify current requirements with the issuing agency.

The work

What watchmakers do

Data Core tasks O*NET lists for Watch and Clock Repairers.

  1. Clean, rinse, and dry timepiece parts, using solutions and ultrasonic or mechanical watch-cleaning machines.
  2. Adjust timing regulators, using truing calipers, watch-rate recorders, and tweezers.
  3. Reassemble timepieces, replacing glass faces and batteries, before returning them to customers.
  4. Disassemble timepieces and inspect them for defective, worn, misaligned, or rusty parts, using loupes.
  5. Oil moving parts of timepieces.
  6. Estimate repair costs and timepiece values.
  7. Repair or replace broken, damaged, or worn parts on timepieces, using lathes, drill presses, and hand tools.
  8. Test timepiece accuracy and performance, using meters and other electronic instruments.
  9. Perform regular adjustment and maintenance on timepieces, watch cases, and watch bands.
  10. Order supplies, including replacement parts, for timing instruments.
  11. Gather information from customers about a timepiece's problems and its service history.
  12. Test and replace batteries and other electronic components.

Skills O*NET rates most important for Watch and Clock Repairers: Repairing, Operations Monitoring, Critical Thinking, Equipment Maintenance, Troubleshooting, Quality Control Analysis.

Knowledge areas O*NET rates most important: Customer and Personal Service, Administration and Management, Mechanical, Administrative, Engineering and Technology, Production and Processing.

Tools and technology examples O*NET lists: Intuit QuickBooks, Microsoft Excel, Microsoft Office software, Microsoft Word, SAP software.

Work activities O*NET rates most important: Repairing and Maintaining Mechanical Equipment, Monitoring Processes, Materials, or Surroundings, Identifying Objects, Actions, and Events, Making Decisions and Solving Problems, Estimating the Quantifiable Characteristics of Products, Events, or Information.

Career path

Related occupations, by preparation

Data Occupations O*NET lists as related, with BLS May 2025 medians and O*NET Job Zones. O*NET defines no promotion ladders; these are related jobs, not a fixed sequence.

Need less preparation
Timing Device Assemblers and Adjusters$62,620 median · Job Zone 1-2 of 5
Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic$46,550 median · Job Zone 1-2 of 5
Grinding and Polishing Workers, Hand$42,660 median · Job Zone 1-2 of 5
Coin, Vending, and Amusement Machine Servicers and Repairers$47,450 median · Job Zone 1-2 of 5
Same or more preparation
Electric Motor, Power Tool, and Related Repairers$56,210 median · Job Zone 3 of 5
Jewelers and Precious Stone and Metal Workers$52,540 median · Job Zone 3 of 5

Data Pay once in the job: the BLS median for Watch and Clock Repairers was $67,230 a year in May 2025; the lowest-paid quarter earned $47,650 or less. See the full Watchmaker salary data.

Outlook

Jobs and openings to 2035

Data BLS Employment Projections 2025–35.

BLS projects employment in Watch and Clock Repairers to decline 0.3% from 2025 to 2035, from 1,400 to 1,400 jobs, with about 100 openings a year on average, including replacement openings (Employment Projections, 2025–35).

Projected openings are BLS's annual average for 2025–35: openings from growth plus openings to replace workers who leave the labor force or move to other occupations. They are not current job vacancies or listings.

Method

How this page is built

Typical entry-level education, related work experience and on-the-job training are BLS Employment Projections 2025–35 categories for the occupation. Job Zone, education shares, tasks, skills, tools and related occupations come from O*NET 31.0; pay is BLS OEWS May 2025. BLS occupation: Watch and clock repairers.

This page includes information from the O*NET® 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. TryHired has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications.

What this page can't tell you
  • Licensing rules in your state.
  • Requirements at a specific employer.
  • How long the path will take you personally.
Sources
  1. U.S. Bureau of Labor Statistics, Employment Projections program, Occupational projections, 2025–35 (released Aug 27, 2026; occupation.xlsx, Tables 1.2 and 1.10; retrieved Oct 25, 2026). Definitions.
  2. O*NET 31.0 Database, U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. TryHired selected, ranked and combined the data; O*NET is not responsible for these pages.
  3. U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 estimates (public domain).
Keep exploring

More for watchmakers