Skip to content
TryHired.
How to become · Stationary Engineer

How to become a stationary engineer: the typical path for Stationary Engineers and Boiler Operators.

The entry education, experience and training BLS lists as typical, how much preparation O*NET says the work takes, what the job involves, and the related occupations around it.

Updated Nov 9, 2026 · Data: BLS Employment Projections 2025–35 · O*NET 31.0 · BLS OEWS May 2025
Typical entry path · BLS Employment Projections 2025–35
Education
High school diploma or equivalent
Related work experience
None
On-the-job training
Long-term on-the-job training
Preparation
Job Zone 3 of 5
O*NET

Typical, not required: BLS describes the usual entry path, not the law.

Quick answer

BLS lists a high school diploma or equivalent as the typical entry-level education for Stationary Engineers and Boiler Operators (SOC 51-8021), the occupation BLS counts stationary engineers in, with no work experience in a related occupation and long-term on-the-job training (more than 12 months) to become competent (Employment Projections, 2025–35). These are typical, not legal requirements. O*NET places the job in Job Zone 3 of 5.

Who this covers

What BLS counts as a stationary engineer

Data Title evidence from O*NET 31.0; figures belong to the official occupation named.

O*NET 31.0 lists “Stationary Engineer” under Stationary Engineers and Boiler Operators (O*NET-SOC 51-8021.00) in its Sample of Reported Titles (titles job holders report) and as an alternate job title. BLS counts these workers in the occupation Stationary Engineers and Boiler Operators (SOC 51-8021). Every figure on this page is for that occupation.

Other titles O*NET lists for the occupation: Auxiliary Operator, Boiler Operator, Boiler Technician (Boiler Tech), Operating Engineer, Operator, Plant Utilities Engineer, Recovery Boiler Operator, Stationary Steam Engineer.

The path

Steps to becoming a stationary engineer

Data Steps 1 to 3 are BLS Employment Projections categories; skills and tools are O*NET; the last step is advice.

  1. EducationPlan for a high school diploma or equivalent

    The typical entry-level education BLS lists for Stationary Engineers and Boiler Operators. Typical, not a legal requirement.

  2. ExperienceRelated work experience

    BLS: no work experience in a related occupation is typical for entry into Stationary Engineers and Boiler Operators.

  3. TrainingExpect long-term on-the-job training (more than 12 months)

    BLS’s typical on-the-job training for Stationary Engineers and Boiler Operators, once hired.

  4. SkillsBuild the core skills

    Operations Monitoring, Operation and Control, Equipment Maintenance are rated most important for the occupation (O*NET).

  5. ToolsLearn the tools

    Microsoft Active Server Pages ASP, Microsoft Excel, Microsoft Office software (examples O*NET lists for the occupation).

  6. KnowledgeStudy the knowledge areas

    Mechanical, Chemistry, Public Safety and Security are the knowledge areas O*NET rates most important for the occupation.

  7. CredentialsCheck licensing with the issuing agency

    Requirements vary by state and change over time; see the box below.

O*NET Job Zone 3 of 5: Previous work-related skill, knowledge, or experience is required for these occupations. For example, an electrician must have completed three or four years of apprenticeship or several years of vocational training, and often must have passed a licensing exam, in order to perform the job.

Education O*NET respondents report as required
Post-secondary certificate47%
High school diploma38%
Associate's degree11%
Some college5%
Related work experience · O*NET respondents
None5%
Over 6 months, up to and including 1 year13%
Over 1 year, up to and including 2 years24%
Over 2 years, up to and including 4 years21%
Over 4 years, up to and including 6 years19%
Over 6 years, up to and including 8 years9%
Over 8 years, up to and including 10 years5%
On-the-job training · O*NET respondents
Over 1 month, up to and including 3 months18%
Over 3 months, up to and including 6 months25%
Over 6 months, up to and including 1 year41%
Over 1 year, up to and including 2 years15%
Required vs typical

What the law requires and what employers prefer

Data Credential contract wording.

What is typical is not what is required. The education, experience and training above are the BLS’s typical entry path for the occupation, not legal requirements. Some occupations also need a government license or registration, set by a state or federal agency; a certification is a credential from a private or professional body, not a license, and employers may prefer one without the law requiring it. This page names no licensing requirement because none is drawn from an official licensing source here, and a missing entry on this page does not mean none is required. Licensing rules can change. Verify current requirements with the issuing agency.

The work

What stationary engineers do

Data Core tasks O*NET lists for Stationary Engineers and Boiler Operators.

  1. Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners.
  2. Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels.
  3. Analyze problems and take appropriate action to ensure continuous and reliable operation of equipment and systems.
  4. Observe and interpret readings on gauges, meters, and charts registering various aspects of boiler operation to ensure that boilers are operating properly.
  5. Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.
  6. Test boiler water quality or arrange for testing and take necessary corrective action, such as adding chemicals to prevent corrosion and harmful deposits.
  7. Switch from automatic to manual controls and isolate equipment mechanically and electrically to allow for safe inspection and repair work.
  8. Perform or arrange for repairs, such as complete overhauls, replacement of defective valves, gaskets, or bearings, or fabrication of new parts.
  9. Adjust controls and/or valves on equipment to provide power, and to regulate and set operations of system or industrial processes.
  10. Clean and lubricate boilers and auxiliary equipment and make minor adjustments as needed, using hand tools.
  11. Develop operation, safety, and maintenance procedures or assist in their development.
  12. Test electrical systems to determine voltages, using voltage meters.

Skills O*NET rates most important for Stationary Engineers and Boiler Operators: Operations Monitoring, Operation and Control, Equipment Maintenance, Troubleshooting, Repairing, Active Listening.

Knowledge areas O*NET rates most important: Mechanical, Chemistry, Public Safety and Security, Physics, Engineering and Technology, English Language.

Tools and technology examples O*NET lists: Microsoft Active Server Pages ASP, Microsoft Excel, Microsoft Office software, Microsoft Outlook, Microsoft PowerPoint, Microsoft Word.

Work activities O*NET rates most important: Inspecting Equipment, Structures, or Materials, Repairing and Maintaining Mechanical Equipment, Making Decisions and Solving Problems, Controlling Machines and Processes, Monitoring Processes, Materials, or Surroundings.

Career path

Related occupations, by preparation

Data Occupations O*NET lists as related, with BLS May 2025 medians and O*NET Job Zones. O*NET defines no promotion ladders; these are related jobs, not a fixed sequence.

Need less preparationSame or more preparation
Control and Valve Installers and Repairers, Except Mechanical Door$74,340 median · Job Zone 3 of 5
Mechanical Engineers$104,110 median · Job Zone 4 of 5Heating, Air Conditioning, and Refrigeration Mechanics and Installers$61,010 median · Job Zone 3 of 5
Power Distributors and Dispatchers$106,730 median · Job Zone 3 of 5

Data Pay once in the job: the BLS median for Stationary Engineers and Boiler Operators was $78,620 a year in May 2025; the lowest-paid quarter earned $63,160 or less. See the full Stationary Engineer salary data.

Outlook

Jobs and openings to 2035

Data BLS Employment Projections 2025–35.

BLS projects employment in Stationary Engineers and Boiler Operators to grow 3.1% from 2025 to 2035, from 31,200 to 32,200 jobs, with about 3,200 openings a year on average, including replacement openings (Employment Projections, 2025–35).

Projected openings are BLS's annual average for 2025–35: openings from growth plus openings to replace workers who leave the labor force or move to other occupations. They are not current job vacancies or listings.

Method

How this page is built

Typical entry-level education, related work experience and on-the-job training are BLS Employment Projections 2025–35 categories for the occupation. Job Zone, education shares, tasks, skills, tools and related occupations come from O*NET 31.0; pay is BLS OEWS May 2025. BLS occupation: Stationary engineers and boiler operators.

This page includes information from the O*NET® 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. TryHired has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications.

What this page can't tell you
  • Licensing rules in your state.
  • Requirements at a specific employer.
  • How long the path will take you personally.
Sources
  1. U.S. Bureau of Labor Statistics, Employment Projections program, Occupational projections, 2025–35 (released Aug 27, 2026; occupation.xlsx, Tables 1.2 and 1.10; retrieved Oct 25, 2026). Definitions.
  2. O*NET 31.0 Database, U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. TryHired selected, ranked and combined the data; O*NET is not responsible for these pages.
  3. U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 estimates (public domain).
Keep exploring

More for stationary engineers