Skip to content
TryHired.
How to become · Small Engine Mechanic

How to become a small engine mechanic: the typical path for Outdoor Power Equipment and Other Small Engine Mechanics.

The entry education, experience and training BLS lists as typical, how much preparation O*NET says the work takes, what the job involves, and the related occupations around it.

Updated Nov 9, 2026 · Data: BLS Employment Projections 2025–35 · O*NET 31.0 · BLS OEWS May 2025
Typical entry path · BLS Employment Projections 2025–35
Education
High school diploma or equivalent
Related work experience
None
On-the-job training
Moderate-term on-the-job training
Preparation
Job Zone 1-2 of 5
O*NET

Typical, not required: BLS describes the usual entry path, not the law.

Quick answer

BLS lists a high school diploma or equivalent as the typical entry-level education for Outdoor Power Equipment and Other Small Engine Mechanics (SOC 49-3053), the occupation BLS counts small engine mechanics in, with no work experience in a related occupation and moderate-term on-the-job training (more than a month, up to 12 months) to become competent (Employment Projections, 2025–35). These are typical, not legal requirements. O*NET places the job in Job Zone 1-2 of 5.

Who this covers

What BLS counts as a small engine mechanic

Data Title evidence from O*NET 31.0; figures belong to the official occupation named.

O*NET 31.0 lists “Small Engine Mechanic” under Outdoor Power Equipment and Other Small Engine Mechanics (O*NET-SOC 49-3053.00) in its Sample of Reported Titles (titles job holders report) and as an alternate job title. BLS counts these workers in the occupation Outdoor Power Equipment and Other Small Engine Mechanics (SOC 49-3053). Every figure on this page is for that occupation.

Other titles O*NET lists for the occupation: Chainsaw Technician, Golf Cart Mechanic, Lawnmower Repair Mechanic, Mechanic, Outdoor Power Equipment Service Technician, Service Technician (Service Tech), Shop Mechanic, Small Engine Technician (Small Engine Tech).

The path

Steps to becoming a small engine mechanic

Data Steps 1 to 3 are BLS Employment Projections categories; skills and tools are O*NET; the last step is advice.

  1. EducationPlan for a high school diploma or equivalent

    The typical entry-level education BLS lists for Outdoor Power Equipment and Other Small Engine Mechanics. Typical, not a legal requirement.

  2. ExperienceRelated work experience

    BLS: no work experience in a related occupation is typical for entry into Outdoor Power Equipment and Other Small Engine Mechanics.

  3. TrainingExpect moderate-term on-the-job training (more than a month, up to 12 months)

    BLS’s typical on-the-job training for Outdoor Power Equipment and Other Small Engine Mechanics, once hired.

  4. SkillsBuild the core skills

    Equipment Maintenance, Repairing, Troubleshooting are rated most important for the occupation (O*NET).

  5. ToolsLearn the tools

    Microsoft Excel, Microsoft Office software (examples O*NET lists for the occupation).

  6. KnowledgeStudy the knowledge areas

    Mechanical, Customer and Personal Service, English Language are the knowledge areas O*NET rates most important for the occupation.

  7. CredentialsCheck licensing with the issuing agency

    Requirements vary by state and change over time; see the box below.

O*NET Job Zone 1-2 of 5: Some occupations may need little or no previous experience; others require several months to a year of experience. For example, landscaping and groundskeeping workers might require very little training or previous experience, while agricultural equipment operators can benefit from on-the job training.

Education O*NET respondents report as required
High school diploma48%
Some college27%
Post-secondary certificate12%
Less than high school12%
Related work experience · O*NET respondents
None4%
Up to and including 1 month4%
Over 1 month, up to and including 3 months9%
Over 6 months, up to and including 1 year17%
Over 1 year, up to and including 2 years27%
Over 2 years, up to and including 4 years35%
Over 4 years, up to and including 6 years4%
On-the-job training · O*NET respondents
None or short demonstration8%
Anything beyond short demonstration, up to and including 1 month24%
Over 1 month, up to and including 3 months10%
Over 3 months, up to and including 6 months32%
Over 6 months, up to and including 1 year15%
Over 1 year, up to and including 2 years12%
Required vs typical

What the law requires and what employers prefer

Data Credential contract wording.

What is typical is not what is required. The education, experience and training above are the BLS’s typical entry path for the occupation, not legal requirements. Some occupations also need a government license or registration, set by a state or federal agency; a certification is a credential from a private or professional body, not a license, and employers may prefer one without the law requiring it. This page names no licensing requirement because none is drawn from an official licensing source here, and a missing entry on this page does not mean none is required. Licensing rules can change. Verify current requirements with the issuing agency.

The work

What small engine mechanics do

Data Core tasks O*NET lists for Outdoor Power Equipment and Other Small Engine Mechanics.

  1. Record repairs made, time spent, and parts used.
  2. Test and inspect engines to determine malfunctions, to locate missing and broken parts, and to verify repairs, using diagnostic instruments.
  3. Dismantle engines, using hand tools, and examine parts for defects.
  4. Repair and maintain gasoline engines used to power equipment such as portable saws, lawn mowers, generators, and compressors.
  5. Adjust points, valves, carburetors, distributors, and spark plug gaps, using feeler gauges.
  6. Repair or replace defective parts such as magnetos, water pumps, gears, pistons, and carburetors, using hand tools.
  7. Perform routine maintenance such as cleaning and oiling parts, honing cylinders, and tuning ignition systems.
  8. Reassemble engines after repair or maintenance work is complete.
  9. Obtain problem descriptions from customers, and prepare cost estimates for repairs.
  10. Show customers how to maintain equipment.
  11. Remove engines from equipment, and position and bolt engines to repair stands.
  12. Sell parts and equipment.

Skills O*NET rates most important for Outdoor Power Equipment and Other Small Engine Mechanics: Equipment Maintenance, Repairing, Troubleshooting, Operations Monitoring, Equipment Selection, Operation and Control.

Knowledge areas O*NET rates most important: Mechanical, Customer and Personal Service, English Language, Engineering and Technology, Education and Training, Transportation.

Tools and technology examples O*NET lists: Microsoft Excel, Microsoft Office software.

Work activities O*NET rates most important: Repairing and Maintaining Mechanical Equipment, Updating and Using Relevant Knowledge, Making Decisions and Solving Problems, Inspecting Equipment, Structures, or Materials, Identifying Objects, Actions, and Events.

Career path

Related occupations, by preparation

Data Occupations O*NET lists as related, with BLS May 2025 medians and O*NET Job Zones. O*NET defines no promotion ladders; these are related jobs, not a fixed sequence.

Same or more preparation
Electric Motor, Power Tool, and Related Repairers$56,210 median · Job Zone 3 of 5
Bus and Truck Mechanics and Diesel Engine Specialists$61,770 median · Job Zone 3 of 5Motorcycle Mechanics$48,580 median · Job Zone 3 of 5Mobile Heavy Equipment Mechanics, Except Engines$65,510 median · Job Zone 3 of 5
Motorboat Mechanics and Service Technicians$57,550 median · Job Zone 3 of 5
Engine and Other Machine Assemblers$53,710 median · Job Zone 1-2 of 5

Data Pay once in the job: the BLS median for Outdoor Power Equipment and Other Small Engine Mechanics was $47,880 a year in May 2025; the lowest-paid quarter earned $40,670 or less. See the full Small Engine Mechanic salary data.

Outlook

Jobs and openings to 2035

Data BLS Employment Projections 2025–35.

BLS projects employment in Outdoor Power Equipment and Other Small Engine Mechanics to grow 2.3% from 2025 to 2035, from 38,300 to 39,200 jobs, with about 3,800 openings a year on average, including replacement openings (Employment Projections, 2025–35).

Projected openings are BLS's annual average for 2025–35: openings from growth plus openings to replace workers who leave the labor force or move to other occupations. They are not current job vacancies or listings.

Method

How this page is built

Typical entry-level education, related work experience and on-the-job training are BLS Employment Projections 2025–35 categories for the occupation. Job Zone, education shares, tasks, skills, tools and related occupations come from O*NET 31.0; pay is BLS OEWS May 2025. BLS occupation: Outdoor power equipment and other small engine mechanics.

This page includes information from the O*NET® 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. TryHired has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications.

What this page can't tell you
  • Licensing rules in your state.
  • Requirements at a specific employer.
  • How long the path will take you personally.
Sources
  1. U.S. Bureau of Labor Statistics, Employment Projections program, Occupational projections, 2025–35 (released Aug 27, 2026; occupation.xlsx, Tables 1.2 and 1.10; retrieved Oct 25, 2026). Definitions.
  2. O*NET 31.0 Database, U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. TryHired selected, ranked and combined the data; O*NET is not responsible for these pages.
  3. U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 estimates (public domain).
Keep exploring

More for small engine mechanics