RF Engineer: the engineers who make radio hardware work
What RF engineers design and measure, how the role differs from general electronics and from antenna or RF test work, what current postings ask for, and how people get in.
An RF (radio frequency) engineer designs, simulates and tests the hardware that sends and receives radio signals: antennas, amplifiers, filters, mixers and the front ends of radios, radar and satellite links. Much of the job is trading off range, power, noise and interference on paper, then proving the design on the bench with network and spectrum analyzers. RF engineers work in telecoms, defense, space, automotive radar and consumer wireless products.
What a RF Engineer does
RF engineering sits between physics and product. A design starts with a link budget: how much signal leaves the transmitter, how much is lost on the way and how much the receiver needs to hear it. From there the engineer chooses parts, simulates the circuits and the electromagnetic behaviour of antennas and boards, and then builds and measures prototypes until the measured performance matches the model.
The title is broad. Some RF engineers own whole radio architectures; others specialise in antennas, power amplifiers, RF integrated circuits or test automation. Space and defense roles add radiation, thermal and reliability constraints; consumer products add cost and high-volume production test. Read the frequency bands and the product in a posting before judging the fit.
- Working through link budgets and frequency plans for a new radio, radar or satellite link.
- Simulating antennas, filters and board layouts in electromagnetic and circuit solvers before committing to hardware.
- Bringing up prototypes in the lab and measuring them with vector network analyzers, spectrum analyzers and signal generators.
- Writing scripts that automate measurements, so tests can be repeated on every unit or every design change.
- Reviewing designs with digital, mechanical and systems engineers and chasing down interference or performance gaps.
O*NET lists RF Engineer as a job title under Electronics Engineers, Except Computer (17-2072.00). That occupation covers wider work, so the O*NET section below describes the whole occupation; the rest of this page is specific to the title.
What employers ask RF Engineers to do and bring
- Employers describe the core of the job as designing RF hardware, from the front end and antennas to filters and amplifiers, and owning its performance trade-offs such as link budgets and frequency planning.
- Simulation is part of the daily work: postings name electromagnetic and circuit tools such as Ansys HFSS and Keysight ADS for modelling antennas, filters and board layouts before building them.
- Hands-on lab measurement comes up in every posting we read: network analyzers, spectrum analyzers, signal generators and power meters, and closing the gap between simulated and measured results.
- Programming is expected alongside the hardware work, mostly Python, MATLAB or C++ for simulation and automated testing.
- The postings we read ask for a bachelor's degree in electrical engineering or a related field such as physics, with experience levels ranging from about a year for early-career roles to many years for technical leads.
- RF engineers work across disciplines: printed circuit board design and layout, and close collaboration with digital, mechanical and systems engineers.
These points come from current job postings on the employers' own public job boards, read on the dates shown. Each general point is backed by at least two independent sources; points that rest on a single employer name that employer. They describe what employers commonly ask for, not legal requirements, and any one employer may differ.
| Source | Posting or document | Read |
|---|---|---|
| Anduril Industries | RF Engineer | Nov 14, 2026 |
| Axon | Senior RF Engineer | Nov 14, 2026 |
| Relativity Space | Senior RF Engineer | Nov 14, 2026 |
| Rocket Lab Corporation | RF Engineer II - Radar | Nov 14, 2026 |
| SpaceX | RF Engineer (Starlink) | Nov 14, 2026 |
RF engineer vs electronics engineer, antenna engineer and RF test engineer
- An electronics engineer may work on any circuit; an RF engineer specialises in high-frequency signals, where board layout, materials and interference dominate the design.
- Antenna engineers focus on the radiating structure itself; many RF engineers design the whole chain from antenna to receiver, and some postings combine the two.
- RF test engineers build the measurement and production test systems; design-focused RF engineers use those systems to prove their designs.
- RF engineers in defense and space work under reliability, radiation and export-control constraints that consumer-product RF roles usually do not have.
How to become a RF Engineer
- Get the electromagnetics foundation. The postings we read ask for electrical engineering or a related field such as physics; courses in electromagnetics, microwave circuits, communications and signals are the core.
- Build and measure something real. A student radio, antenna or SDR project that you designed, simulated and then measured on a network analyzer is strong interview material.
- Learn the tools by name. Get hands-on time with at least one EM solver and one circuit simulator, and with the lab instruments postings name.
- Add scripting. Automating a measurement in Python or MATLAB shows employers you can scale testing beyond one bench.
- Pick a domain. Satellite links, radar, cellular, automotive radar and consumer Wi-Fi each have their own standards and constraints; target postings in one of them.
What RF Engineers work with
- Simulation: EM and circuit solvers such as HFSS, ADS, AWR or CST, and the judgment to know when a model is wrong.
- Lab instruments: vector network analyzers, spectrum analyzers, signal generators, power meters and software-defined radios.
- Board design: schematic capture and RF layout review, controlled impedance and grounding.
- Scripting: Python or MATLAB for test automation, data analysis and link-budget models.
- Systems thinking: link budgets, noise figure, linearity and interference, explained clearly to non-RF colleagues.
What O*NET says about Electronics Engineers, Except Computer
The data below describes the whole O*NET occupation Electronics Engineers, Except Computer (17-2072.00), not rf engineers specifically. Use it to see what the wider occupation is rated on; the sections above describe what is different about this title.
| # | Task (O*NET wording) |
|---|---|
| 1 | Design electronic components, software, products, or systems for commercial, industrial, medical, military, or scientific applications. |
| 2 | Operate computer-assisted engineering or design software or equipment to perform electronics engineering tasks. |
| 3 | Evaluate project work to ensure effectiveness, technical adequacy, or compatibility in the resolution of complex electronics engineering problems. |
| 4 | Direct or coordinate activities concerned with manufacture, construction, installation, maintenance, operation, or modification of electronic equipment, products, or systems. |
| 5 | Confer with engineers, customers, vendors, or others to discuss existing or potential electronics engineering projects or products. |
| Skill | Importance (1–5) |
|---|---|
| Reading Comprehension | 4.00 |
| Critical Thinking | 4.00 |
| Speaking | 3.88 |
| Active Listening | 3.75 |
| Writing | 3.50 |
| Mathematics | 3.50 |
In-demand technology named by O*NET for this occupation: Microsoft Excel, Microsoft Office software, Python, The MathWorks MATLAB.
Education reported by workers in this occupation (O*NET survey): Bachelor's Degree 83.3%; Associate's Degree or other 2-year degree 13.8%. These shares describe the whole occupation; they are not a requirement for this title.
O*NET 31.0 Database, U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. TryHired selected, ranked and combined the data; O*NET is not responsible for these pages.
Credentials: what exists and what employers rely on
- RF engineering jobs in industry are generally not licensed; the postings above ask for a degree and experience rather than a certificate.
- Engineers who sign off public engineering work in some settings hold a state Professional Engineer license; the route usually starts with the FE exam.
Certifications are optional unless an employer or regulator says otherwise; read the posting, and check eligibility on the issuer's own site before you apply.
Where this role leads
- Electronics Engineer: the broader occupation, for circuit and systems design beyond RF.
- Electrical Engineer: for power, controls and wider electrical systems.
- Aerospace Engineer: for space and aviation programs that rely on RF links and radar.
What RF Engineers earn
TryHired does not print a salary for rf engineers. The U.S. Bureau of Labor Statistics publishes pay for occupations, not job titles, so the closest official figures are for the wider occupation. For the official numbers, see electronics engineer salary: those figures cover all Electronics Engineers, Except Computer (BLS 17-2072), not rf engineers specifically.
Pay for this title depends on employer, industry, region and level, so ask how the role is graded and compare offers against the posting's own range where one is published.
Applying for RF Engineer jobs
- Lead your resume with designs you took from simulation to measured hardware, and say how close the measurements came to the model.
- Name the frequency bands, parts and instruments you have used; RF hiring managers read for specifics.
- Bring one debugging story: an interference, spur or matching problem you traced and fixed.
- If you automated tests, say what it saved, for example how many units or design spins it covered.
Two free tools start from this job title, so you only add your own experience: draft a resume summary for a RF Engineer role or write a LinkedIn headline for a RF Engineer role. Neither fills in skills or results for you: list only the work you have actually done.
Structure, sections and examples you can adapt to this title.
Open →InterviewElectronics Engineer interviewQuestions to rehearse before the interview.
Open →Disclosure: TryHired makes HIRED, a paid job-search program, so we have a conflict of interest when we mention it. Everything on this page is free to use without buying anything.
Other job titles in this group
Questions people ask
What does an RF engineer do?
What degree do RF engineers have?
Is RF engineering the same as antenna engineering?
How this page is built
The employer section summarises current postings from the employers' own public job boards, saved on the read date shown; every general point is backed by at least two independent sources and single-employer points name the employer; each maps to short verbatim quotes in this page's claims ledger. Employers' preferences are not legal requirements. The job, difference, path, tools and hiring sections are TryHired's explanation and advice, labelled as such. The O*NET section shows O*NET 31.0 data for the broader occupation and says so. TryHired does not print pay for job titles that BLS does not publish separately.
- Pay for this title: BLS publishes occupations, not titles.
- Whether a particular employer requires a degree, a certification or a license for this title.
- How a specific company levels or names this role.
- SpaceX, “RF Engineer (Starlink)” job posting, read Nov 14, 2026.
- Anduril Industries, “RF Engineer” job posting, read Nov 14, 2026.
- Axon, “Senior RF Engineer” job posting, read Nov 14, 2026.
- Relativity Space, “Senior RF Engineer” job posting, read Nov 14, 2026.
- Rocket Lab Corporation, “RF Engineer II - Radar” job posting, read Nov 14, 2026.
- O*NET 31.0 Database, U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. TryHired selected, ranked and combined the data; O*NET is not responsible for these pages.
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (via the linked TryHired salary page)