Skip to content
TryHired.
Certifications · Heavy equipment operator

Heavy equipment certification: NCCER, CCO and the OSHA crane rule

Training credentials, third-party certifications and a federal rule that applies only to cranes. What each one is and which machines it covers.

Updated Nov 16, 2026 · Sources: 29 CFR 1926.1427 (GPO) · CCO · NCCER · BLS Occupational Outlook Handbook
Quick answer

There is no one heavy equipment operator certification that covers every machine. The clearest federal rule is for cranes in construction: OSHA requires the employer to make sure each crane operator is trained, certified or licensed, and evaluated before operating. For excavators, dozers and loaders, the credentials on offer include training and assessment programs such as NCCER's Heavy Equipment Operations curriculum. A few states also license operators of backhoes, loaders and bulldozers, so check your state before you enroll.

Compare

The main credentials side by side

Data
Heavy equipment operator credentials compared
CredentialWho issues itWhat kind it isMachines it covers
CCO crane certificationsCCO (formerly NCCCO)A third-party certification with written and practical exams for most programsMobile, tower and other crane types
CCO telehandler and digger derrickCCO (formerly NCCCO)A third-party certification; telehandler runs on a three-year cycleTelehandlers and digger derricks
NCCER Heavy Equipment OperationsNCCERTraining credentials from a modular curriculum, with knowledge and hands-on testingEarthmoving and site equipment used in construction, farming and mining
State operator licenseSome statesA license, in the few states that have oneBackhoes, loaders and bulldozers, where licensed
Commercial driver's license (CDL)Your stateA driver's license class, often needed to haul equipmentThe truck, not the machine

The table compares only what each source says. It is not a ranking. Training credentials, certifications and licenses are different things, explained below.

Federal rule

The OSHA rule: cranes in construction

Data

Until you are certified or licensed and evaluated, you may run a crane only as an operator-in-training under supervision. One route the rule allows is certification by an accredited crane operator testing organization, such as CCO; and where the rule requires certification, the employer must provide it at no cost to the employee.

The rule has exceptions, including derricks, sideboom cranes and equipment rated to lift 2,000 pounds or less, and it covers cranes, not excavators or dozers. Exam details for cranes are in TryHired's crane operator certification guide. The rule text here is from the Code of Federal Regulations annual edition on GPO govinfo; the current text can also be read on the eCFR.

NCCER

NCCER for earthmoving equipment

Data

NCCER's catalog lists Heavy Equipment Operations Level 1 at 185 hours, including 77.5 hours of NCCER's Core curriculum, and later levels cover machines such as compaction equipment, backhoes and dump trucks.

If you already run equipment, NCCER also has assessments with hands-on performance checks for experienced workers. NCCER credentials are earned through its accredited training sponsors, so you take them through a school, employer or training center. More on NCCER is in TryHired's NCCER certification guide.

Credential types

Training, certification and license

Data
  • Certificate: CCO describes this as a document an instructor gives you for finishing a course.
  • Certification: an evaluation by a third-party organization.
  • License: issued by a government agency when you meet its legal requirements.

A school's certificate of completion, an NCCER credential and a CCO certification are not interchangeable. Ask which one the posting means.

Choose

What to get first

Advice
  1. Check your state for an operator license and the CDL class you would need to move equipment.
  2. Earthmoving work: a training program, such as an NCCER-based course or an apprenticeship, is the route BLS describes alongside on-the-job learning.
  3. Crane work: plan for an accredited crane certification; under OSHA's rule your employer must provide it where it is required.
  4. Forklifts and telehandlers on site: see TryHired's forklift operator training guide for the separate training rule.

BLS notes that operators learn on the job, through apprenticeships or at vocational schools, so a certification is not the only way in.

Resume and LinkedIn

How to list it

Advice

Use the exact name of the credential: [Credential], [Issuer], [Year].

  • Name each credential with its issuer: CCO, NCCER or the state.
  • List each machine you are certified or trained on.
  • Put a CDL on its own line with its class and endorsements.
Example line (replace the brackets)
CCO Certified Mobile Crane Operator, [specialty], expires [Month Year]
NCCER Heavy Equipment Operations Level [1], [Year]
CDL Class [letter], [State]

On LinkedIn: add each certification under Licenses & certifications, and list the machines you run in your experience section.

Write only what you hold. A credential line states a credential; it is not an achievement, so keep results in your experience bullets. More: how to add certifications to a resume.

Get hired

Use it in your application

Advice
Related careers

Careers this credential is used in

Pay figures on those pages belong to the occupation (BLS), not to holders of this credential.

Disclosure: TryHired makes HIRED, a paid job-search program, so we have a conflict of interest when we mention it. Everything on this page is free to use without buying anything. TryHired does not issue, sell or train for any certification.

FAQ

Questions people ask

Is certification required to operate heavy equipment?
For cranes in construction, yes: OSHA requires operators to be certified or licensed and evaluated. For other machines it depends on the state and the employer.
Is NCCER a certification or a license?
Neither a license nor a federal requirement. NCCER issues training credentials and assessment-based certifications; a license comes only from a government agency.
How long does CCO certification last?
CCO says most of its certifications last five years; a few, such as telehandler, run on a three-year cycle.
Who pays for crane operator certification?
Where OSHA's crane rule requires it, the employer must provide it at no cost to the employee.
Can I get heavy equipment certified online?
Knowledge parts of some programs can be online, but operating skills are tested hands-on: CCO, for example, uses a practical exam for most of its certifications.
Method

How this page is built

The crane rule is from 29 CFR 1926.1427 (GPO govinfo, CFR annual edition revised as of July 1, 2025); CCO facts are from its certification and testing pages; NCCER facts are from its credential pages and craft catalog; licensing and training points are from the BLS Occupational Outlook Handbook. osha.gov refused automated reads in our previous checks, so the regulation text comes from GPO. Licensing rules can change. Verify current requirements with the issuing agency. Certifications like the ones on this page are separate from state occupational licenses. Every fact on this page is written in our own words from the issuer's or agency's page, read on the date shown; fees, exam versions and rules change, so this page is re-checked against those sources by 2027-01-15.

What this page can't tell you
  • Whether a particular employer requires or prefers this credential.
  • Your chance of passing, or how long it will take you personally.
  • Any salary effect: TryHired does not credit a credential with higher pay or a job.
  • State operator licenses: rules differ by state.
  • Other crane certifying organizations.
  • Employer and union training programs.
Sources
  1. 29 CFR 1926.1427, Operator training, certification, and evaluation (GPO govinfo, CFR annual edition revised as of July 1, 2025), read Nov 15, 2026.
  2. CCO, “Certifications At-A-Glance”, read Nov 15, 2026.
  3. CCO, “How to Get Certified” (testing overview), read Nov 15, 2026.
  4. CCO, “Certification vs. Qualification for Crane Personnel”, read Nov 15, 2026.
  5. NCCER, “Industry-Recognized Credentials”, read Nov 15, 2026.
  6. NCCER, Craft Catalog (PDF, February 2025 edition), read Nov 15, 2026.
  7. NCCER, “Credentials & Certifications”, read Nov 15, 2026.
  8. U.S. Bureau of Labor Statistics, Occupational Outlook Handbook, “Construction Equipment Operators”, read Nov 15, 2026.