Flagger certification and training: what the rules say
Flaggers control traffic through work zones, and many job postings ask for a flagger card. Here is what federal rules say, what the national traffic control manual expects of flaggers and where the card requirement comes from.
OSHA's construction rule says flagging, including what flaggers wear, must follow Part 6 of the Manual on Uniform Traffic Control Devices (MUTCD), and the MUTCD says flaggers should be trained in safe traffic control and in dealing with the public. There is no single federal flagger card. Whether you need a state-issued or state-approved card, and from which course, depends on the state and on the contract.
What this credential is
| Kind | Work-zone training. Card requirements, where they exist, come from states, agencies or employers, not one federal certification. |
|---|---|
| Rules | 29 CFR 1926.201 points to Part 6 of the MUTCD, the national standard for temporary traffic control. |
| Who it is for | Road construction, utility, tree service and event workers who direct traffic. |
| Who provides it | State-approved course providers, contractor associations, employers and some state agencies. |
What flaggers should be able to do
The MUTCD lists qualities a flagger should have. They include:
- Giving and receiving clear, firm and courteous instructions.
- Moving quickly to get out of the way of errant vehicles.
- Spotting dangerous traffic in time to warn the crew.
- Applying safe traffic control practices under pressure, including emergencies.
Paddles and high-visibility apparel
- The STOP/SLOW paddle is the preferred hand-signaling device, ahead of red flags.
- Flaggers must wear high-visibility safety apparel that meets the national performance classes set out in the manual.
Your employer or the contract will say which vest, paddle and lighting to use. Follow the edition of the manual your state has adopted, because states update their versions on their own schedules.
Where card requirements come from
Several states require flaggers on public road projects to complete an approved course and carry a card, sometimes with an expiry date. Others leave it to the agency's contract or the employer's safety program. Utility and tree crews may follow their own company rules even off public roads. Before paying for a course, check the state transportation department or labor agency where you will work, or ask the contractor which card it accepts. A course from another state may not be accepted, so a cheaper online course is not always the right one.
Where it matters in hiring
Flagging is a common entry point to road construction and traffic control companies. Postings often ask for a current card, reliable transport to changing job sites and the ability to stand outdoors in all weather. From flagging, people move into traffic control technician, laborer, equipment operator and crew lead roles. On a resume, show the card, the states it is valid in, and any work-zone setup experience such as placing signs and cones. Reliability and a clean safety record matter more to these employers than almost anything else.
How to list it
Use the exact name of the credential: Flagger training card ([State or provider], valid through [Month Year]).
- Name the state or approving agency; cards are not interchangeable everywhere.
- Add the expiry date if your card has one.
- List traffic control setup experience separately.
On LinkedIn: list it under Licenses & certifications with the provider or state agency as the issuer.
Write only what you hold. A credential line states a credential; it is not an achievement, so keep results in your experience bullets. More: how to add certifications to a resume.
Getting road crew work
- Start a resume summary for a Flagger role (the title is filled in; you add your own experience)
- Draft a LinkedIn headline for a Flagger role
- Practice construction worker interview questions
- Check your resume against a job posting for free
Careers this credential is used in
Flagging is often the first job on a road crew.
Open →CareerTransportation engineerDesigns the traffic control plans flaggers follow.
Open →CareerLinemanUtility crews use flaggers when work blocks a road.
Open →CareerOSHA 10 cardA general construction safety course employers often ask for too.
Open →Pay figures on those pages belong to the occupation (BLS), not to holders of this credential.
Disclosure: TryHired makes HIRED, a paid job-search program, so we have a conflict of interest when we mention it. Everything on this page is free to use without buying anything. TryHired does not issue, sell or train for any certification.
Questions people ask
Is there a federal flagger certification?
What does OSHA say about flaggers?
What should flaggers be trained in?
Do flaggers have to wear a vest?
Is an online flagger course enough?
How this page is built
The eCFR text of 29 CFR 1926.201 and Chapter 6E of the FHWA MUTCD describe the federal signaling rule, flagger qualifications and apparel. Certifications and training cards like this one are separate from state occupational licenses. Every fact on this page is written in our own words from the issuer's or agency's page, read on the date shown; fees, exam versions and rules change, so this page is re-checked against those sources by 2027-01-13.
- Whether a particular employer requires or prefers this credential.
- Your chance of passing, or how long it will take you personally.
- Any salary effect: TryHired does not credit a credential with higher pay or a job.
- Each state's flagger card rules, course approvals and expiry periods.
- Newer MUTCD editions your state may have adopted.
- eCFR: 29 CFR 1926.201, Signaling, read Nov 14, 2026.
- FHWA MUTCD (2009 edition), Part 6 Chapter 6E, Flagger Control, read Nov 14, 2026.