Skip to content
TryHired.
How to become · Auto Body Technician

How to become an auto body technician: the typical path for Automotive Body and Related Repairers.

The entry education, experience and training BLS lists as typical, how much preparation O*NET says the work takes, what the job involves, and the related occupations around it.

Updated Nov 9, 2026 · Data: BLS Employment Projections 2025–35 · O*NET 31.0 · BLS OEWS May 2025
Typical entry path · BLS Employment Projections 2025–35
Education
High school diploma or equivalent
Related work experience
None
On-the-job training
Long-term on-the-job training
Preparation
Job Zone 1-2 of 5
O*NET

Typical, not required: BLS describes the usual entry path, not the law.

Quick answer

BLS lists a high school diploma or equivalent as the typical entry-level education for Automotive Body and Related Repairers (SOC 49-3021), the occupation BLS counts auto body technicians in, with no work experience in a related occupation and long-term on-the-job training (more than 12 months) to become competent (Employment Projections, 2025–35). These are typical, not legal requirements. O*NET places the job in Job Zone 1-2 of 5.

Who this covers

What BLS counts as an auto body technician

Data Title evidence from O*NET 31.0; figures belong to the official occupation named.

BLS counts these workers in the occupation Automotive Body and Related Repairers (SOC 49-3021). Every figure on this page is for that occupation.

Other titles O*NET lists for the occupation: Auto Body Man, Auto Body Repair Technician (Auto Body Repair Tech), Auto Body Repairman, Automotive Body Technician (Auto Body Tech), Body Man, Body Technician (Body Tech), Collision Repair Technician (Collision Repair Tech), Collision Technician (Collision Tech).

The path

Steps to becoming an auto body technician

Data Steps 1 to 3 are BLS Employment Projections categories; skills and tools are O*NET; the last step is advice.

  1. EducationPlan for a high school diploma or equivalent

    The typical entry-level education BLS lists for Automotive Body and Related Repairers. Typical, not a legal requirement.

  2. ExperienceRelated work experience

    BLS: no work experience in a related occupation is typical for entry into Automotive Body and Related Repairers.

  3. TrainingExpect long-term on-the-job training (more than 12 months)

    BLS’s typical on-the-job training for Automotive Body and Related Repairers, once hired.

  4. SkillsBuild the core skills

    Repairing, Troubleshooting, Operations Monitoring are rated most important for the occupation (O*NET).

  5. ToolsLearn the tools

    Microsoft Excel, Microsoft Office software, Microsoft Outlook (examples O*NET lists for the occupation).

  6. KnowledgeStudy the knowledge areas

    Mechanical, Customer and Personal Service, Production and Processing are the knowledge areas O*NET rates most important for the occupation.

  7. CredentialsCheck licensing with the issuing agency

    Requirements vary by state and change over time; see the box below.

O*NET Job Zone 1-2 of 5: Some occupations may need little or no previous experience; others require several months to a year of experience. For example, landscaping and groundskeeping workers might require very little training or previous experience, while agricultural equipment operators can benefit from on-the job training.

Education O*NET respondents report as required
High school diploma42%
Post-secondary certificate35%
Less than high school23%
Related work experience · O*NET respondents
None41%
Up to and including 1 month12%
Over 3 months, up to and including 6 months5%
Over 6 months, up to and including 1 year12%
Over 1 year, up to and including 2 years5%
Over 2 years, up to and including 4 years7%
Over 4 years, up to and including 6 years13%
Over 10 years5%
On-the-job training · O*NET respondents
None or short demonstration18%
Anything beyond short demonstration, up to and including 1 month36%
Over 1 month, up to and including 3 months11%
Over 3 months, up to and including 6 months9%
Over 1 year, up to and including 2 years26%
Required vs typical

What the law requires and what employers prefer

Data Credential contract wording.

What is typical is not what is required. The education, experience and training above are the BLS’s typical entry path for the occupation, not legal requirements. Some occupations also need a government license or registration, set by a state or federal agency; a certification is a credential from a private or professional body, not a license, and employers may prefer one without the law requiring it. This page names no licensing requirement because none is drawn from an official licensing source here, and a missing entry on this page does not mean none is required. Licensing rules can change. Verify current requirements with the issuing agency.

The work

What auto body technicians do

Data Core tasks O*NET lists for Automotive Body and Related Repairers.

  1. File, grind, sand, and smooth filled or repaired surfaces, using power tools and hand tools.
  2. Inspect repaired vehicles for proper functioning, completion of work, dimensional accuracy, and overall appearance of paint job, and test-drive vehicles to ensure proper alignment and handling.
  3. Fit and weld replacement parts into place, using wrenches and welding equipment, and grind down welds to smooth them, using power grinders and other tools.
  4. Prime and paint repaired surfaces, using paint sprayguns and motorized sanders.
  5. Follow supervisors' instructions as to which parts to restore or replace and how much time the job should take.
  6. Sand body areas to be painted and cover bumpers, windows, and trim with masking tape or paper to protect them from the paint.
  7. Chain or clamp frames and sections to alignment machines that use hydraulic pressure to align damaged components.
  8. Position dolly blocks against surfaces of dented areas and beat opposite surfaces to remove dents, using hammers.
  9. Cut and tape plastic separating film to outside repair areas to avoid damaging surrounding surfaces during repair procedure and remove tape and wash surfaces after repairs are complete.
  10. Review damage reports, prepare or review repair cost estimates, and plan work to be performed.
  11. Fill small dents that cannot be worked out with plastic or solder.
  12. Remove damaged sections of vehicles using metal-cutting guns, air grinders and wrenches, and install replacement parts using wrenches or welding equipment.

Skills O*NET rates most important for Automotive Body and Related Repairers: Repairing, Troubleshooting, Operations Monitoring, Quality Control Analysis, Time Management, Active Listening.

Knowledge areas O*NET rates most important: Mechanical, Customer and Personal Service, Production and Processing, Mathematics.

Tools and technology examples O*NET lists: Microsoft Excel, Microsoft Office software, Microsoft Outlook, Microsoft Windows, Microsoft Word.

Work activities O*NET rates most important: Updating and Using Relevant Knowledge, Getting Information, Making Decisions and Solving Problems, Operating Vehicles, Mechanized Devices, or Equipment, Identifying Objects, Actions, and Events.

Career path

Related occupations, by preparation

Data Occupations O*NET lists as related, with BLS May 2025 medians and O*NET Job Zones. O*NET defines no promotion ladders; these are related jobs, not a fixed sequence.

Same or more preparation
Automotive Service Technicians and Mechanics$50,620 median · Job Zone 3 of 5
Rail Car Repairers$67,530 median · Job Zone 1-2 of 5
Tire Builders$57,390 median · Job Zone 1-2 of 5
Aircraft Structure, Surfaces, Rigging, and Systems Assemblers$65,380 median · Job Zone 1-2 of 5
Electric Motor, Power Tool, and Related Repairers$56,210 median · Job Zone 3 of 5
Engine and Other Machine Assemblers$53,710 median · Job Zone 1-2 of 5

Data Pay once in the job: the BLS median for Automotive Body and Related Repairers was $54,890 a year in May 2025; the lowest-paid quarter earned $45,750 or less. See the full Auto Body Technician salary data.

Outlook

Jobs and openings to 2035

Data BLS Employment Projections 2025–35.

BLS projects employment in Automotive Body and Related Repairers to grow 3.7% from 2025 to 2035, from 163,200 to 169,300 jobs, with about 12,600 openings a year on average, including replacement openings (Employment Projections, 2025–35).

Projected openings are BLS's annual average for 2025–35: openings from growth plus openings to replace workers who leave the labor force or move to other occupations. They are not current job vacancies or listings.

Method

How this page is built

Typical entry-level education, related work experience and on-the-job training are BLS Employment Projections 2025–35 categories for the occupation. Job Zone, education shares, tasks, skills, tools and related occupations come from O*NET 31.0; pay is BLS OEWS May 2025. BLS occupation: Automotive body and related repairers.

This page includes information from the O*NET® 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. TryHired has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications.

What this page can't tell you
  • Licensing rules in your state.
  • Requirements at a specific employer.
  • How long the path will take you personally.
Sources
  1. U.S. Bureau of Labor Statistics, Employment Projections program, Occupational projections, 2025–35 (released Aug 27, 2026; occupation.xlsx, Tables 1.2 and 1.10; retrieved Oct 25, 2026). Definitions.
  2. O*NET 31.0 Database, U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under the CC BY 4.0 license. TryHired selected, ranked and combined the data; O*NET is not responsible for these pages.
  3. U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 estimates (public domain).
Keep exploring

More for auto body technicians